AQUENCE® CG 070A is a ready-to-use adhesive product designed for seaming, adhesive, and contact adhesive applications, particularly in the envelope industry. This versatile product is suitable for use on paper and cardboard substrates, and it is white in color. It is in the form of a liquid emulsion.

Supplied By: Henkel Corporation

Product Code: H01376

Regional Availability: Canada

RTU Product Type: Adhesive, Contact Adhesive, Seaming Adhesive

    Enhanced TDS

    Identification & Functionality

    Applications & Uses

    Markets
    Applications
    Segments
    Applications
    Application Area
    Compatible Substrates & Surfaces
    Product Application
    • Direct transfer from glue wheel, rotary stencil, extrusion.
    • Stir the product before use.
    • Avoid build-up of dried adhesive.
    • Dilution : Designed for use at supplied viscosity but may be diluted with water/glue liquor if necessary.
    • Cleaning : Clean up wet or dry adhesive with soap and warm water. Clean dry film with 50/50 acetone/water mixture.

    Properties

    Color (Properties)
    Physical Form
    Appearance
    White fluid
    Product Properties
    • This product displays very high tack and fast set speed for the most demanding Glued Lap applications with minimal compression time or high memory corrugated board.
    • It machines very cleanly with little build-up on contact extruders such as Valco or Copar
    • This product contains UV additive designed to fluoresce green for Valco ClearVision and other detection systems.

    Regulatory & Compliance

    Certifications & Compliance
    Chemical Inventories

    Packaging & Availability

    Packaging Type
    Regional Availability
    • Canada

    Storage & Handling

    Shelf Life
    6 months
    Product Storage
    • Protect from temperatures below 40°F.
    • Rotate stock using oldest material first.
    • Keep covered to prevent contamination and drying out.
    • Do not mix with other adhesives
    Product Shelf Life
    • For best results, use within 6 months from date of shipment.
    • Maximum stability is obtained if adhesive is stored between 5 to 16°C.
    • Viscosity will increase with time in storage.